Handles 420 uprights, 120, 250, & 330 gallon horizontals

800 lb cargo capacity

Net weight 135 lbs (with dollies, pins and YankATank)

Width 31″, length 80″

Lifting ratio is approximately 10:1. If a 500 lb. (250 gallon) tank is lifted  into transporting position on the YankATank, 50-60 lbs downward handle pressure is required.)

The operator’s weight is easily and favorably utilized in providing the downward force to lift tanks.

Downward pressure on the YankATank handle to lift tanks is ergonomically much easier on the back, arms, fingers, etc. than when personnel attempt to scoot, lift, scrape, drag, roll or otherwise manipulate or move tanks without the YankATank.

Dollies included to roll tanks lengthwise through gates and narrow openings.

We do not recommend 500 gallon tanks be transported by YankATank Dollies even though we hear that this is a common practice. Do so your own risk. We are not responsible for any damages or accidents that may occur.

Cargo capacity – 1,500 lbs

YankA500 weight – 280 lbs.

Everything needed to move tanks included. Handles 500 gallon horizontal tanks and smaller

Optional pneumatic tire and wheel kit available for moving unit by hand, add $150.

The TankRoller is heavy duty and adjustable. Designed so you can paint, evacuate, maintain and inspect most horizontal propane tanks, handles 120, 250, 330, 500 and 1,000 gallon horizontals. Keeps tank clearance high enough you can evacuate LPG with tank fittings straight down.

Comes standard with brake so control of tank can always be maintained as it is turned.

The TankRoller support rollers reach approximately 20″ above ground level to allow 360 degree access to valves.

The TankRoller base has support pads for additional stability. 2″ wide rollers are non-marring polyurethane with easy rolling bearings. It is designed to be used at your plant or in the field.

Handles 120 gallon through 1,000 gallon tanks

Lifting lugs are included to allow quick loading with a crane.

• Maximum span length  between roller points……..68″
• Minimum span length between roller points……….42″
• Shipping weight………135 lbs.
• Gross tank weight capacity…..3,800 lbs.

• Move 500 & 1,000 gallon tanks quickly & efficiently
• Jack includes enlarged base, lift extension, & pneumatic tires
• No-mar tank contact points
• Trailing 1400 lb. capacity dolly with extension for easy handling and attachment
• Front 1400 lb. capacity steering dolly with tongue for push/pull handling and steering, pindle hitch included
• Quick-place pins allow for fast mount/dismount of dollies on tank
• Fits most 500 & 1,000 gallon LPG tanks
• Front dolly with tongue 50″ wide, 14″ high, 59″ deep, 145 lbs
• Rear dolly 50″ wide, 14″ high, 27″ deep, 100 lbs
• Jack 57″ high, 16″ wide, 64″ deep, 90 lbs

Hitch Mount goes in 2″ receiver hitch to transport YankATank on back of vehicle as shown in picture 2. (YankATank and truck not included.)

YankATank dollies should be removed when transporting. (Removal and attachment takes a few seconds)

Weighing less than 70 lbs for easy handling and featuring a quick-fold handle to minimize cargo space, the YankAnUpright is built rugged to transport empty or loaded 420 lb. upright tanks. Four pnuematic tires provide a stable base stance and doesn’t hinder operator access while lifting tanks, both features much preferable to the competition. Unique fulcrum action allows ergonomically superior lifting action. Attaches to tank without having to lift or shift tank.

Quick fold-up, rugged construction and easy tank handling make the YankAnUpright the premium upright tank carrier on the market today. Complete with Quick Strap

• Tank Weight Capacity: 650lbs
• Empty Dolly Weight: 70lbs
• Lift Ratio: 10:1