Print Back
Master Shut-Off 1/2" Female Sweat Ends, Copper Seat
Unit of Measure

Purchasing Info

QTY Avbl For Sale

BEN

FLI

GOL

LEE

Stock Class

QB5

QB4

QB3

QB2

QB1

UOM

Specifications

Brand

Rego®

Height A

4.36 in

Height B

3.25 in

Height C

5.5 in

Inlet Connection Size

0.843 to 0.847 in

Outlet Connection Size

0.843 to 0.847 in

Temperature Range

-40 to +165 ºF

Seat Option

Metal

Packing Material

Polychlorotrifluoroethylene (PCTFE)

Materials

Body Material

Brass

Bonnet Material

Brass

Stem Material

Brass

Seat Retainer Material

Brass

Stem Seal Retaining Rings and Washer Material

Brass

Stem O-Ring Material

Viton®

Handwheel Washer Material

Polytetrafluoroethylene (PTFE)

Options

Options

A copper seat disc is used in the seat retainer to create a seal against a Monel body seat which is installed into the body and can be replaced. Valve Cv is 2.3. The metal seat option minimizes the possibility of seat decomposition or ignition in oxygen and can be used in other non-corrosive industrial gases. The metal seat option is not to be used for acetylene due to the copper seat. Not to be applied in hydrogen or helium service or where "bubble-tight" seal is essential. (Note: "C" in part number)

Applications

Applications

The HP9560 Series high pressure brass valves are used on cylinder filling panels, tube trailers, and other high pressure manifolds and piping systems. The HP9560 Series exhibits a very low operating torque under pressure for ease of manual operation.

Features

Features

  • All valves cleaned for use in oxygen per CGA-4.1
  • Temperature range -40º to +165 ºF
  • 100% factory tested

Proposition 65 Information

N/A

WARNING: This product can expose you to one or more chemicals known to the state of California to cause cancer, birth defects or reproductive harm. For more information, go to www.p65warnings.ca.gov