1,000 Gal ASME Underground Tank with Long Riser
These tanks listed are intended for pickup from our Lee, MA and Bensalem, PA warehouses. A pickup date must be arranged with our customer service team within 2 weeks after placing your order. Any tank orders not picked up within that timeframe may be cancelled. For full or partial truckload pricing and sizing, please contact your RMI Sales Representative or a member of our Customer Service team.
QTY Avbl For Sale |
N/A {-} |
BEN |
N/A {-} |
FLI |
N/A {-} |
GOL |
N/A {-} |
LEE |
N/A {-} |
Stock Class |
N/A {-} |
QB5 |
N/A {-} |
QB4 |
N/A {-} |
QB3 |
N/A {-} |
QB2 |
N/A {-} |
QB1 |
N/A {-} |
UOM |
N/A {-} |
Brand |
N/A Quality Steel |
Features |
N/A
Each tank comes with the anode lead already attached. Simply attach the wire from the anode bag by crimping a copper ferrule between the two wires. The tank is coated with an epoxy polyamide primer is applied and cured in a gas fired oven. This primer forms a strong bond with the metal and starts building the thickness of coating that is required for underground protection. A finish coat of green acrylic urethane is applied and cured in another gas fired oven to form a hard tough outer covering. Excellent corrosion protection can be expected as a consequence of this coating formulation, as verified by test results. |
Capacity |
N/A 1000 inWG1000 gal |
Outside Diameter (O.D) |
N/A 41 in |
Weight |
N/A 1760 lb |
Container Type |
N/A ASME |
Diameter |
N/A 3 ft 5 in |
Overall Length |
N/A 16 in |
Tank Size |
N/A 1,000 gal |
Number/Stack |
N/A 5 |
Leg Spacing |
N/A 121 in |
Height with Hood |
N/A 5 ft. 10 in. |
Replacement Parts for Underground ASME Tanks |
N/A
Tank Size-1000 WG Multivalve-67-0807 (Must cut dip tube to D.T. length stamped on tank.) Top Check Lock Valves-ME460 24" Riser AWT Float Gauge - MES-FG1281-004R 28" Riser Trinity Float Gauge - JB424C AWT Dome - UG |
Tank Valving |
N/A 2-1/2" Stack with Cluster Valve Float Gauge Liquid Withdrawal with Check Lock |
Tank Construction |
N/A Steel |
Coatings |
N/A
An epoxy polyamide primer is applied and cured in a gas fired oven. This primer forms a strong bond with the metal and starts building the thickness of coating that is required for underground protection. A finish coat of green acrylic urethane is applied and cured in another gas fired oven to form a hard tough outer covering. Excellent corrosion protection can be expected as a consequence of this coating formulation, as verified by test results. |
Anode Protection |
N/A
Each tank comes with the anode lead already attached. Simply attach the wire from the anode bag by crimping a copper ferrule between the two wires. |
N/A
WARNING: This product can expose you to one or more chemicals known to the state of California to cause cancer, birth defects or reproductive harm. For more information, go to www.p65warnings.ca.gov |