Print Back
M.C. Miller Cathodic Testing Meter with Case
Unit of Measure

Purchasing Info

QTY Avbl For Sale

N/A {-}

BEN

N/A {-}

FLI

N/A {-}

GOL

N/A {-}

LEE

N/A {-}

Stock Class

N/A {-}

QB5

N/A {-}

QB4

N/A {-}

QB3

N/A {-}

QB2

N/A {-}

QB1

N/A {-}

UOM

N/A {-}

Additional Information

Additional Information

N/A For Checking The Output Of An Anode
  1. Remove protective caps from meter and electrode.
  2. Connect orange negative lead to tank.
  3. Contact earth with electrode (the porous plug should be in contact with moist soil. Grass should not be allowed to come between plug & soil.)
  4. Take and record reading & polarity. Reading should be at least -0.85 volts.
  5. Replace protective cap at lower end of electrode.
DOT requires a yearly test on installed anodes. The MCM-1A makes this test very simple. Touch wire to tank and ground half cell to earth. Test can be made in minutes.

Proposition 65 Information

N/A

WARNING: This product can expose you to one or more chemicals known to the state of California to cause cancer, birth defects or reproductive harm. For more information, go to www.p65warnings.ca.gov